Chapter 5 Configuring the Meter
Configure – General Tab
34 DSAM Help User Guide Rev. 001
About Me
You can personalize your meter by entering your name on the Enter
Your Info screen. (The Employee ID is set by TPP.)
Configuring “About
Me”
To personalize your meter
1 Press Configure.
2 Press the General softkey.
3 Using the arrow keys, select About Me.
4 Press ENTER.
Backlight Off The number of seconds of non-activity before the
screen dims. Valid options are:
– Always
– After 5 seconds
– After 15 seconds
– After 30 seconds
– Never
The default option is After 15 seconds.
Table 14 Battery Conservation Parameters (Continued)
Name Description
Figure 19 Configure – General Tab: About Me
21128026 R001 DSAM Help User Guide.book Page 34 Thursday, February 5, 2009 2:02 PM
To Next Page
Loading...
