Chapter 5 Configuring the Meter
Configure – General Tab
DSAM Help User Guide Rev. 001 33
5 Using the arrow keys, select the parameter you want to edit.
6 Press ENTER.
7 Using the arrow keys, select an option.
8 Press ENTER.
9 Press the OK softkey.
Figure 18 Configure – Optimize Battery Life
NOTE
Press Shift, Shift to turn the backlight on or off.
Table 14 Battery Conservation Parameters
Name Description
Meter Off The number of minutes of non-activity before the
meter powers off. Valid options are:
– After 5 minutes
– After 10 minutes
– After 15 minutes
– Never
The default option is After 15 minutes.
21128026 R001 DSAM Help User Guide.book Page 33 Thursday, February 5, 2009 2:02 PM
To Next Page
Loading...
Need help?
General
