JDS Uniphase DSAM-3500 - Figure 182 Create a New Work Folder Screen; Changing the Default Folder; Creating a New Folder

Chapter 8 Measure Mode – Basic Tab
Saving Results
200 DSAM Help User Guide Rev. 001
10 Press the Skip.
11 Using the arrow keys and the alphanumeric keypad, edit the
entry.
12 Press ENTER.
13 Press the OK softkey.
Creating a New
Folder
To create a new folder
1 Press the Folder softkey.
2 Using the arrow keys, select New.
3 Press ENTER.
4 Using the alphanumeric keypad, enter the folder name.
5 Press the OK softkey.
Changing the
Default Folder
To change the default folder
1 Press the Folder softkey.
2 Using the arrow keys, select Change.
3 Press ENTER.
4 Using the arrow keys, select a different folder.
5 Press ENTER.
6 Press the OK softkey.
Figure 182 Create a New Work Folder screen
21128026 R001 DSAM Help User Guide.book Page 200 Thursday, February 5, 2009 2:02 PM