Chapter 9 Measure Mode – Service Tab
VoIP
240 DSAM Help User Guide Rev. 001
21 Highlight one of the following options:
– On Hook - Terminates the call.
– Off Hook - Enables you to verify a dial tone.
– Server Info - Displays the Embedded Multimedia Terminal
Adaptor (EMTA) network assignments.
– View MOS - Displays the Current, Maximum, and Average
results of the R-Value Listening, R-Value Conversational, MOS
Listening, and MOS Conversational values.
– View Data - Displays the Current, Maximum, and Average
results of the Local and Remote packet loss, jitter (ms), and
Delay (ms) values.
– Restart - Restarts the VoIP initialization process.
22 Press ENTER.
Accepting a Call
When there is an incoming call, the DSAM displays “Incoming Call”
with Accept and Ignore softkeys.
Figure 217 Measure Mode – VoIP EMTA Network
Assignments
21128026 R001 DSAM Help User Guide.book Page 240 Thursday, February 5, 2009 2:02 PM
To Next Page
Loading...
Need help?
General
