Chapter 5 Configuring the Meter
Configure – General Tab
46 DSAM Help User Guide Rev. 001
3 Using the arrow keys, select Security.
4 Press ENTER.
5 Using the arrow keys, select Set your personal identification
number (PIN).
6 Press ENTER.
7 Type your four-digit PIN using only digits 0 through 9.
8 Press the Next softkey.
9 Type your PIN again to confirm it.
10 Press the OK softkey.
Figure 33 Configure – General Tab: Security
Figure 34 Configure – Administer Security
21128026 R001 DSAM Help User Guide.book Page 46 Thursday, February 5, 2009 2:02 PM
To Next Page
Loading...
