Johnson Controls FMS-2000C User Manual

FMS-2000C
LIT-12013504
56
Overriding relay outputs
Control relay outputs manually to help verify the correct operation or allocation of the controller resources. Relay outputs remain in the
override state only while the Relay Outputs screen displays. All relay outputs return to their original state once you exit the screen. For
example, use the override as a verication test and trigger remote annunciators to alert users of an alarm condition at the controller.
To switch on an override for relay outputs, complete the following steps:
1. On the home screen, tap the Settings icon.
2. On the SETTINGS screen, scroll down and tap Diagnostics.
3. On the DIAGNOSTICS screen, tap the Overrides arrow.
4. To adjust the Relay Outputs, tap the Relay Outputs arrow.
5. Switch the RELAY on that you want to override.
6. To leave the Relay Outputs screen, tap the Checkmark or Cancel icon.
Saving settings
Once you have completed your conguration, save the settings for later recall if needed. Saving your settings erases any previously
saved settings. To save your settings, complete the following steps:
1. On the home screen, tap the Settings icon.
2. On the SETTINGS screen, scroll down and tap Diagnostics.
3. On the DIAGNOSTICS screen, tap the Settings arrow.
4. On the Settings screen, tap the Save Settings arrow.
5. On the SAVE SETTINGS screen, tap Proceed and enter your password.
6. To conrm, tap the Checkmark icon twice.
Restoring settings
You can either restore your previously saved user settings or revert back to factory settings.
1. On the home screen, tap the Settings icon.
2. On the SETTINGS screen, scroll down and tap Diagnostics.
3. On the DIAGNOSTICS screen, tap the Settings arrow.
4. On the Settings screen, tap the Restore Settings arrow and choose from the following options:
• Factory Settings
• User Settings
5. To conrm your choice, tap the Checkmark icon.
Resetting the FMS-2000C controller
To perform a soft reset of the FMS-2000C controller, complete the following steps:
1. On the home screen, tap the Settings icon.
2. On the SETTINGS screen, scroll down and tap Diagnostics.
3. On the DIAGNOSTICS screen, tap the Reboot Controller arrow.
4. On the REBOOT CONTROLLER screen, tap Proceed. The FMS-2000C controller resets.
Resetting the FMS-2000C
To perform a soft reset of both the controller and the display, complete the following steps:
1. On the home screen, tap the Settings icon.
2. On the SETTINGS screen, scroll down and tap Diagnostics.
3. On the DIAGNOSTICS screen, tap the Reboot System arrow.
4. On the REBOOT screen, tap Proceed. The FMS-2000C controller reboots.

Johnson Controls FMS-2000C Specifications

General

Brand	Johnson Controls
Model	FMS-2000C
Category	Controller
Language	English