3 – 42
3
3.4 BASIC OPERATIONS
.
..
2) Continue to press also allow you to set the starting point of EBL1.
Continue to press . “OFFSET” in “5.EBL1” will be set.
Continue to press . “CENTER” in “5.EBL1” will be set.
Note: For OFFSET of the EBL’s starting point, it is possible to determine whether the
starting point is fixed at specific latitude and longitude.
To offset the starting point of EBL2 during its operation:
1) Press .
The Main Menu will appear.
Press .
“OFFSET” in “6.EBL2” will be set.
Move the starting point of EBL2 with the trackball.
Click the trackball section left button to fix the starting point of
EBL2.
To reset the starting point of EBL2 to the center of the radar
display:
Press .
“CENTER” in “6.EBL2” will be set.
Press .
The Main Menu will be closed.
2) Continue to press also allow you to set the starting point of EBL2.
To Next Page
Loading...
Need help?
General
