2 – 7
q: Tuning indicator mode
Sets the tuning mode to MANUAL or AUTO.
/
(Manual tuning) , (Automatic tuning)
w: Change the Interswitch connection pattern
Opens the interswitch menu.
Attention:
This function is operable only when the radar is in the standby mode.
e: Function of Radar interference reflector (IR)
Turns the radar interference reflector ON or OFF.
/
(radar interference reflector OFF)
,
(radar interference reflector ON)
r: Function of Sea clutter suppression (SEA)
Sets the sea clutter suppression to MANUAL or AUTO.
/
(Manual sea clutter suppression) , (Automatic sea clutter suppression)
t: Function of Rain/snow clutter suppression (RAIN)
Sets the rain/snow clutter suppression to MANUAL or AUTO.
/
(Manual rain/snow clutter suppression) , (Automatic rain/snow clutter suppression)
y: Function of Own ship’s track indication (TRACK)
Turns the own ship’s track indication ON or OFF.
/ “Interval Time preset in the TRACK menu”
(No own ship’s track indication)
, (One memory interval of 3, 10, 15 or 30 minutes displayed)
Attention:
This function is available only when the latitude and longitude data and the course data are received.
u: Function of Radar video track indication (TRAILS)
Sets the interval time for radar video track indication.
////
i
: Function of Radar video processing (PROC)
Sets the radar video processing mode.
///
PROC3PROC2PROC1OFF
6MIN3MIN1MIN0.5MINOFF
OFF
AUTOMAN
AUTOMAN
AUTOMANUAL
To Next Page
Loading...
Need help?
General
