2 – 11
@4: Manual input of own ship’s speed
Position the arrow cursor on the value area and click the trackball section left button, then the ten-
key pad can be used to enter a value. After entering the value, press the to set the own
ship’s speed.
Attention:
The own ship’s speed can be manually entered only when MANUAL is selected for the speed unit
setting (@3).
@5: CPA RING indication ON/OFF
Turns the CPA RING indication ON or OFF.
/
(CPA RING indication OFF) , (CPA RING indication ON)
Attention:
CPA RING cannot be turned ON when the vector mode is TRUE.
To Next Page
Loading...
Need help?
General
