FX-3R Maintenance Guide
12-30
12-2-4-5. Changing the OS Language (Perform this operation only when the language
needs to be changed.)
When changing the OS language, the data is written into the C-drive. Therefore, update the C-drive
before changing the language.
(The OS language change operation automatically shut down the OS. Therefore, update the C-drive
first.)
1) Click the [Start] button of Windows and run Command Prompt from Programs in the Start
menu.
2) In the Console window (DOS screen), type “ewfmgr.exe c: -commit”. The following screen will
appear.
∗ CAUTION
If the C-drive is not updated at this time, the operation status is returned to the previous status
when restarting the system even though the OS language is changed.
3) In the status that the system is started up, select [Area Setting…] from the [Options] menu.
Rev. 1.00
To Next Page
Loading...
Need help?
General
