JUKI FX-3R User Manual

FX-3R Maintenance Guide
12-2
12-1-2. Setting Up the Touch Panel (TECNART, TM150-JDA03)
After the LCD monitor has been replaced, it is necessary to set up the touch panel.
1) Check the [MENU] and [-] buttons on the front of the LCD monitor.
2) Press the [MENU] button to display the “Monitor Setting” screen.
3) Press the [-] button to select [TP Calib] on the “Monitor Setting” screen.
Rev. 1.00

JUKI FX-3R Specifications

General

Brand	JUKI
Model	FX-3R
Category	Industrial Equipment
Language	English