JUKI FX-3R - Replacing the Transport Pulley; Transport Pulley a Assembly: E21117150 A0

FX-3R Maintenance Guide
5-2
Rev. 1.00
5-2. Replacing the Transport Pulley
Two kinds of transport pulleys are available. If the mounting position is changed or the pulley is
mounted incorrectly, this may cause incorrect pulley rotation or incorrect alignment of the transport
belt, resulting in wear on the belt.
Always refer to relevant mounting procedure when mounting the transport pulley.
5-2-1. Transport Pulley A Assembly: E21117150A0
Figure 5-2-1-1 Transport Pulley A Assembly
5-2-2. Transport Pulley B Assembly: E20897210A0
Figure 5-2-2-1 Transport Pulley B Assembly
SB104000100
Roll bearing Q’ty: 1
E2111715000
Transport pulley A Q’ty: 1
E2089721000
Transport pulley B Q’ty: 1
SB104000100
Roll bearing Q’ty: 2