JUKI FX-3R - Adjusting the Dial of the Vacuum Pump Electromagnetic Switch; (Thermal Protector)

FX-3R Maintenance Guide
13-62
13-12. Adjusting the Dial of the Vacuum Pump Electromagnetic Switch
(Thermal Protector)
[Functions]
The temperature and current are monitored to prevent the over-current from flowing to the
vacuum pump caused by the electromagnetic switch (thermal protector) in the noise filter
assembly.
[Settings]
Setting current dial adjustment value: 4.4A
Dial for adjustment of setting current
Figure 13-12-1 Dial for Adjustment of Setting Current of Electromagnetic Switch
(Thermal Protector)
Rev. 1.00