JUKI FX-3R User Manual

FX-3R Maintenance Guide
12-34
7) The “START INSTALLATION” confirmation dialog box will appear.
Click the [Install] button to move to step 8).
8) The “Specification of an installation option” screen will appear, prompting you to select whether
to initialize the Mech Control Parameters and whether to back up the existing software.
∗ CAUTION The button displays may vary depending on
the language specification of the OS.
<Do you renew Mech Control Parameter ?>
Yes Mechanical control parameters are initialized and the default values are set.
No
Currently set mechanical control parameters are succeeded to a new version.
When upgrading the program, newly required data becomes the default values.
<Is the existing soft backup performed ?>
Yes The exiting software is backed up.
No The backup process of the exiting software is skipped.
Check on [Yes] or [No] in each item. The installation will start.
Rev. 1.00

JUKI FX-3R Specifications

General

Brand	JUKI
Model	FX-3R
Category	Industrial Equipment
Language	English