Juniper SRX210 Series - Table 30: Accessory Parts List for the SRX210 Services Gateway

Table 30: Accessory Parts List for the SRX210 Services Gateway
QuantityPart
1Juniper Networks Product Warranty
1End User License Agreement
1SRX100, SRX210, and SRX220 Services Gateways Initial
Setup Overview
1SRX210 Services Gateway Initial Hardware Setup
1One-Touch Configuration and Security Setup
1Security Products Safety Guide
1Juniper Compliance Form Letter
1Product Registration
1Tie wrap
NOTE: The mounting kits available for rack, wall, and desk installation of the
SRX210 Services Gateway must be ordered separately. Contact your Juniper
Networks customer service representative for more information.
NOTE: The Mini-Physical InterfaceModules(Mini-PIMs) are not shipped with
the device. Youhaveto orderthem separately. Contact your Juniper Networks
customer service representative for more information.
Related
Documentation
• Required Tools and Parts for Installing and Maintaining the SRX210 Services Gateway
on page 78
• Unpacking the SRX210 Services Gateway on page 81
• Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation on page 85
83Copyright © 2012, Juniper Networks, Inc.
Chapter 11: Unpacking the Services Gateway