CHAPTER 12
Installing the Mounting Hardware
•
Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation on page 85
•
Preparing the SRX210 Services Gateway for Rack-Mount Installation on page 85
•
Adjusting the Power Supply Adapter Tray for the SRX210 Services Gateway for
Rack-Mount Installation on page 87
•
Preparing the SRX210 Services Gateway for Desk-Mount Installation on page 88
•
Preparing the SRX210 Services Gateway for Wall-Mount Installation on page 89
Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation
You can mount an SRX210 Services Gateway in a rack, on a desk, or on a wall. See the
following topics for more information:
•
Preparing the SRX210 Services Gateway for Rack-Mount Installation on page 85
•
Preparing the SRX210 Services Gateway for Desk-Mount Installation on page 88
•
Preparing the SRX210 Services Gateway for Wall-Mount Installation on page 89
The mounting kits for rack, wall, and desk installation of the SRX210 Services Gateway
must be ordered separately. Contact your Juniper Networks customer service
representative for more information.
Related
Documentation
Site Preparation Checklist for the SRX210 Services Gateway on page 37•
• Unpacking the SRX210 Services Gateway on page 81
• Clearance Requirements for Airflow and Hardware Maintenance of the SRX210 Services
Gateway on page 41
Preparing the SRX210 Services Gateway for Rack-Mount Installation
You can mount an SRX210 Services Gateway on four-post (telco) racks, enclosed
cabinets, and open-frame racks.
85Copyright © 2012, Juniper Networks, Inc.
To Next Page
Loading...
