CHAPTER 11
Unpacking the Services Gateway
•
Unpacking the SRX210 Services Gateway on page 81
•
Verifying Parts Received with the SRX210 Services Gateway on page 82
Unpacking the SRX210 Services Gateway
The SRX210 Services Gateway is shipped in a cardboard carton. The carton also contains
an accessory box and the following documents:
•
SRX100, SRX210, and SRX220 Services Gateway Initial Setup Overview
•
SRX210 Services Gateway Initial Hardware Setup
•
One-Touch Configuration and Security Setup
NOTE: The device is maximally protected inside the shipping carton. Do not
unpack it until you are ready to begin installation.
To unpack the SRX210 Services Gateway:
1. Open the box in which the device is shipped.
2. Verify the parts received against the lists in “Verifying Parts Received with the SRX210
Services Gateway” on page 82.
3. Store the shipping box and packing material in case you need to return or move the
device at a later time.
Related
Documentation
Required Tools and Parts for Installing and Maintaining the SRX210 Services Gateway
on page 78
•
• Verifying Parts Received with the SRX210 Services Gateway on page 82
• Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation on page 85
• Installation Overview for the SRX210 Services Gateway on page 77
81Copyright © 2012, Juniper Networks, Inc.
To Next Page
Loading...
