Juniper SRX210 Series - Gateway; Table 28: Required Tools and Parts for Installing and Maintaining the SRX210 Services Gateway

Table 27: Installation Process Order for the SRX210 Services
Gateway (continued)
For more information, seeTaskStep
“Grounding the SRX210 Services
Gateway” on page 108
Connect the grounding cables.7
“Powering On and Powering Off the
SRX210 Services Gateway” on
page 109
Power on the services gateway.8
Related
Documentation
Unpacking the SRX210 Services Gateway on page 81•
• General Site Guidelines for Installing the SRX210 Services Gateway on page 39
• Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation on page 85
Required Tools and Parts for Installing and Maintaining the SRX210 Services Gateway
Table 28 on page 78 lists the tools and equipments required to install and maintain the
SRX210 Services Gateway.
Table 28: Required Tools and Parts for Installing and Maintaining the
SRX210 Services Gateway
Related TopicTools and PartsTask
•
Installing the SRX210
Services Gateway in a Rack
on page 95
•
Installing the SRX210
Services Gateway on a Desk
on page 99
•
Installing the SRX210
Services Gateway on a Wall
on page 100
•
Phillips (+) screwdriver,
number 1
•
Tie wrap
Installing the SRX210 Services
Gateway
“Connecting the SRX210
Services Gateway to the
Power Supply” on page 105
Electrostatic discharge (ESD)
grounding wrist strap
Connecting the SRX210
Services Gateway
“Grounding the SRX210
Services Gateway” on page 108
Phillips (+) screwdriver,
number 1
Grounding the SRX210
Services Gateway
“Packing the SRX210 Services
Gateway and Components for
Shipment” on page 161
•
Blank panel to cover empty
Mini-PIM slot
•
Electrostatic bag or
antistatic mat, for each
component
•
Electrostatic discharge
(ESD) grounding wrist strap
Packing the SRX210 Services
Gateway
Copyright © 2012, Juniper Networks, Inc.78
SRX210 Services Gateway Hardware