Juniper SRX210 Series - SRX210 Services Gateway Leds; Front Panel Leds; Figure 4: SRX210 Services Gateway Front Panel Leds

NOTE: The cable tie holder provides support to hold the power cord on to
the power supply point.
The lock provides the capability to lock and secure the device to the
installation site.
Related
Documentation
SRX210 Services Gateway Specifications on page 7•
• SRX210 Services Gateway Built-In Interfaces on page 14
• SRX210 Services Gateway LEDs on page 11
• SRX210 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 17
• SRX210 Services Gateway Cooling System on page 18
• SRX210 Services Gateway Power Supply on page 19
SRX210 Services Gateway LEDs
This topic includes the following sections:
•
Front Panel LEDs on page 11
•
Ethernet Port LEDs on page 13
Front Panel LEDs
Figure 4 on page 11 shows the SRX210 Services Gateway front panel LEDs.
Table 8 on page 12 lists the LED indicators on the SRX210 Services Gateway front panel.
Figure 4: SRX210 Services Gateway Front Panel LEDs
11Copyright © 2012, Juniper Networks, Inc.
Chapter 2: Hardware Components and Specifications