CHAPTER 6
Site Preparation
•
Site Preparation Checklist for the SRX210 Services Gateway on page 37
•
General Site Guidelines for Installing the SRX210 Services Gateway on page 39
•
SRX210 Services Gateway Cabinet Requirements on page 39
•
SRX210 Services Gateway Rack Requirements on page 40
•
Clearance Requirements for Airflow and Hardware Maintenance of the SRX210 Services
Gateway on page 41
•
SRX210 Services Gateway Electrical and Power Requirements on page 42
Site Preparation Checklist for the SRX210 Services Gateway
The checklist in Table 16 on page 37 summarizes the tasks you need to perform when
preparing a site for installing the SRX210 Services Gateway.
Table 16: Site Preparation Checklist for the SRX210 Services Gateway
Installation
Date
and
NotesAdditional InformationItem or Task
Environment
“SRX210 Services Gateway
Specifications” on page 7
Verify that environmental factors such as
temperature and humidity do not exceed device
tolerances.
Power
“SRX210 Services Gateway Site
Electrical Wiring Guidelines” on
page 67
“SRX210 Services Gateway Power
Specifications and Requirements”
on page 68
•
Measure distance between external power
sources and device installation site.
•
Locate sites for connection of system
grounding.
•
Calculate the power consumption and
requirements.
Rack Installation
37Copyright © 2012, Juniper Networks, Inc.
To Next Page
Loading...
