Juniper SRX210 Series - Figure 12: Ethernet Cable Connector (RJ-45); Table 24: RJ-45 Connector Pinouts for the Services Gateway Ethernet Port; Table 25: RJ-45 Connector Pinouts for the Services Gateway Ethernet Port

Figure 12: Ethernet Cable Connector (RJ-45)
Table 24 on page 72 describes the RJ-45 connector pinouts for the Ethernet port for
10/100 Mbps.
Table 24: RJ-45 Connector Pinouts for the Services Gateway Ethernet
Port (10/100 Mbps)
SignalPin
TX+1
TX-2
RX+3
Termination network4
Termination network5
RX-6
Termination network7
Termination network8
Table 25 on page 72 describes the RJ-45 connector pinouts for the Ethernet port for 1
Gbps (1000 Mbps).
Table 25: RJ-45 Connector Pinouts for the Services Gateway Ethernet
Port (1 Gbps)
SignalPin
BI_DA+1
BI_DA-2
BI_DB+3
BI_DC+4
BI_DC-5
BI_DB-6
BI_DD+7
Copyright © 2012, Juniper Networks, Inc.72
SRX210 Services Gateway Hardware