CHAPTER 20
Monitoring Hardware Components
•
Monitoring the SRX210 Services Gateway Chassis Using the CLI on page 145
•
Monitoring the SRX210 Services Gateway Components Using LEDs on page 147
•
Monitoring the SRX210 Services Gateway Using Chassis Alarm Conditions on page 149
•
Monitoring the SRX210 Services Gateway Power System on page 152
Monitoring the SRX210 Services Gateway Chassis Using the CLI
You can monitor alarms to troubleshoot hardware problems on a services gateway. The
chassis properties include the status of active chassis alarms on the device, environment
measurements, and the status of Mini-PIMs on the device.
To view these chassis properties, select Monitor in the J-Web interface, or enter the
following CLI show commands:
•
show chassis hardware
•
show chassis hardware detail
•
show chassis environment
•
show chassis fpc
•
show chassis alarms
Examples:
The following examples provide the sample output of commands:
show chassis hardware
•
For the SRX210 Services Gateway
user@host > show chassis hardware
Item Version Part number Serial number Description
Chassis SRX210b
Routing Engine REV X0 750-021778 000000PS2627 RE-SRX210B
FPC 0 FPC
145Copyright © 2012, Juniper Networks, Inc.
To Next Page
Loading...
