•
The 3G ExpressCard is designed to fit tightly in the slot. You will encounter two
points of resistance while inserting the 3G ExpressCard into the slot. Use firm
pressure as you insert the card.
•
You will encounter the first point of resistance when you begin to insert the 3G
ExpressCard. After you align the 3G ExpressCard, lift the card slightly and use firm
pressure to slide it into the slot.
•
When you have partially inserted the 3G ExpressCard, you will encounter the second
point of resistance. Use additional pressure to finish inserting the 3G ExpressCard
into the slot.
Related
Documentation
SRX210 Services Gateway 3G ExpressCard Overview on page 29•
• SRX210 Services Gateway 3G ExpressCard Basic CLI Commands on page 33
SRX210 Services Gateway 3G ExpressCard Basic CLI Commands
Table 15 on page 33 lists the basic CLI commands for operating the 3G ExpressCard on
the SRX210 Services Gateway.
The 3G wireless interface uses the prefix cl in the syntax cl-slot-number/0/port number.
Table 15: SRX210 Services Gateway 3G ExpressCard Basic CLI Commands
CommandAction
show modem wireless interface cl-0/0/8
show interfaces terse
Checks the status of the 3G ExpressCard.
CDMA ExpressCards
request modem wireless activate
•
request modem wireless activate iota cl-0/0/8
•
request modem wireless activate manual cl-0/0/8
msl MSL value mdn MDN value imsi IMSI value sid
SID value nid NID value sip-user-id SIP ID
sip-password SIP_PASSWORD
•
request modem wireless activate otasp cl-0/0/8
dial-string calling number
Activates the CDMA ExpressCard
•
IOTA — Activates Internet-based over air
provisioning .
•
Manual activation — Requires manual
entry of the required information.
•
OTASP — Activates over the air service
provisioning.
GSM
request modem wireless gsm sim-unlock cl-0/0/8
pin
Unlocks the GSM SIM.
set interfaces cl-0/0/ 8 cellular-options gsm-options
sim-unlock-code
Unlocks the SIM automatically on reboot
33Copyright © 2012, Juniper Networks, Inc.
Chapter 5: 3G Wireless Functionality
To Next Page
Loading...
