Table 15: SRX210 Services Gateway 3G ExpressCard Basic CLI
Commands (continued)
CommandAction
request modem wireless gsm sim-unblock cl-0/0/8
puk new-puk-number pin new-pin-number
NOTE: You must obtain the PUK value from your
cellular service provider.
Recovers the SIM from the Pin Unlock Key
(PUK) state
When you attempt to unlock the SIM, if you
enter a wrong PIN three times in a row, the
SIM enters the PUK state.
request modem wireless gsm change-pin cl-0/0/8
old-pin current-pin-number new-pin new-pin-number
Changes the PIN on the SIM.
For more information about configuring the 3G wireless interface, see Junos OS Interfaces
and Routing Configuration Guide.
Related
Documentation
• SRX210 Services Gateway 3G ExpressCard Overview on page 29
• Installing the 3G ExpressCard in the SRX210 Services Gateway ExpressCard Slot on
page 32
Copyright © 2012, Juniper Networks, Inc.34
SRX210 Services Gateway Hardware
To Next Page
Loading...
