SRX210 Services Gateway Chassis Serial Number and Agency Labels
The SRX210 Services Gateway has a serial number ID and agency labels on the bottom
of the chassis as shown in Figure 28 on page 159.
Figure 28: Location of SRX210 Serial Number and Agency Labels
SRX210 Services Gateway Mini-Physical Interface Module Serial Number Label
Mini-Physical Interface Modules (Mini-PIMs) are field-replaceable on the SRX210 Services
Gateway. Each Mini-PIM has a unique serial number. The serial number label is located
on the right side of the Mini-PIM, when the Mini-PIM is horizontally oriented (as it would
be installed on the device). The exact location might be slightly different on different
Mini-PIMs, depending on the placement of components on the Mini-PIM.
Related
Documentation
Packing the SRX210 Services Gateway and Components for Shipment on page 161•
• Return Procedure for the SRX210 Services Gateway on page 157
• Contacting Customer Support on page 160
Information You Might Need to Supply to Juniper Networks Technical Assistance Center
If you are returning a services gateway or hardware component to Juniper Networks for
repair or replacement, obtain a Return Materials Authorization (RMA) number from
Juniper Networks Technical Assistance Center (JTAC).
159Copyright © 2012, Juniper Networks, Inc.
Chapter 23: Returning the Services Gateway
To Next Page
Loading...
