EasyManua.ls Logo

Juniper SRX210 Series - Table 5: SRX210 Services Gateway Specifications

Juniper SRX210 Series
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 5: SRX210 Services Gateway Specifications
ValueSpecification
1 unit (U)Chassis height
11.02 in. (28 cm)Chassis width
7.04 in. (17.9 cm)Chassis depth
3.43 lb (1.56 kg) for SRX210 Services Gateway Low
Memory and High Memory models
3.50 lb (1.59 kg) for SRX210 Services Gateway with
PoE
Chassis weight
SRX210 Services Gateway Low Memory model: 27
watts
SRX210 Services Gateway High Memory model: 28
watts
SRX210 Services Gateway PoE model: 34 watts
(excluding PoE load)
Average power consumption
No performance degradation up to 10,000 ft (3048
m) for SRX210 Services Gateway Low Memory, High
Memory, and PoE models
Altitude
5% to 90%, noncondensingRelative humidity
Normal operation ensured in temperature range of
32°F (0°C) to 104°F (+40°C)
Nonoperating storage temperature in shipping
container: –40°F (–40°C) to 158°F (70°C)
Temperature
NOTE: These specifications are estimates and subject
to change.
SRX210 Services Gateway Low Memory: 120
BTU/hour
SRX210 Services Gateway High Memory: 126
BTU/hour
SRX210 Services Gateway with PoE: 164 BTU/hour
(Excluding PoE load)
Maximum thermal output
70 dB(A) or less per EN ISO 7779Noise level
CAUTION: Before removing or installingcomponentsof a functioning services
gateway, attach an electrostatic discharge (ESD) strap to an ESD point and
place the other end of the strap around your bare wrist. Failure to use an ESD
strap could result in damage to the services gateway.
Copyright © 2012, Juniper Networks, Inc.8
SRX210 Services Gateway Hardware

Table of Contents

Related product manuals