Juniper SRX210 Series - Page 108

Table 33: SRX210 Services Gateway Preinstallation Checklist for
Wall-Mount Installation (continued)
Additional InformationTask
Verify that you have the following parts available in
your wall-mounting kit to mount the SRX210 Services
Gateway on wall:
•
Wall-mounting brackets
•
Screws
NOTE: The wall-mounting kit is not shipped with the device and must be
ordered separately.
Related
Documentation
• Site Preparation Checklist for the SRX210 Services Gateway on page 37
• Unpacking the SRX210 Services Gateway on page 81
• Preparing the SRX210 Services Gateway for Rack-Mount Installation on page 85
• Preparing the SRX210 Services Gateway for Desk-Mount Installation on page 88
Copyright © 2012, Juniper Networks, Inc.90
SRX210 Services Gateway Hardware