See the SRX Series Services Gateways for the Branch Physical Interface Modules Hardware
Guide for information about installing Mini-PIMs.
NOTE: The Mini-PIMs available on the SRX210 Services Gateway are not
hot-swappable.You need to power off the devicebeforeremovingor installing
Mini-PIMs.
Related
Documentation
• SRX210 Services Gateway Installation Safety Guidelines and Warnings on page 91
• Installing the SRX210 Services Gateway on a Desk on page 99
• Installing the SRX210 Services Gateway on a Wall on page 100
• Installing the SRX210 Services Gateway in a Rack on page 95
103Copyright © 2012, Juniper Networks, Inc.
Chapter 13: Installing the Services Gateway
To Next Page
