•
When you return a component, make sure that it is adequately protected with packing
materials and packed so that the pieces are prevented from moving around inside the
carton.
•
Use the original shipping materials if they are available.
•
Place individual Mini-Physical Interface Modules (Mini-PIMs) in electrostatic bags.
•
Write the Return Materials Authorization (RMA) number on the exterior of the box to
ensure proper tracking.
CAUTION: Do not stack any of the services gateway components during
packing.
Related
Documentation
• Required Tools and Parts for Installing and Maintaining the SRX210 Services Gateway
on page 78
• Locating an SRX210 Services Gateway Component Serial Number and Agency Labels
on page 158
• Information You Might Need to Supply to Juniper Networks Technical Assistance Center
on page 159
• Return Procedure for the SRX210 Services Gateway on page 157
• Contacting Customer Support on page 160
Copyright © 2012, Juniper Networks, Inc.162
SRX210 Services Gateway Hardware
To Next Page
Loading...
