Keithley 2600a series User Manual

2600AS-901-01 Rev. B / September 2008 Return to Section Topics 10-21
Series 2600A System SourceMeter® Instruments Reference Manual Section 10: Triggering
Table 10-7
Event log descriptions
Column title Description Example
Received Time
• Displays the date and time
of the LAN trigger occurred.
• Displays the value in UTC,
24-hour time.
06:56:28.000 8 May 2008
EventID Identifies the
lan.trigger[N] that
generates an event.
LAN0 = lan.trigger[1]
LAN1 = lan.trigger[2]
LAN2 = lan.trigger[3]
LAN3 = lan.trigger[4]
LAN4 = lan.trigger[5]
LAN5 = lan.trigger[6]
LAN6 = lan.trigger[7]
LAN7 = lan.trigger[8]
From Displays the IP address for
the device that generates the
LAN trigger.
• localhost
• 192.168.5.20
Timestamp
A timestamp that identifies the
time the event occurred. The
timestamp uses the following:
• PTP timestamp
• Seconds
• Fractional Seconds
The Series 2600A does not support
the IEEE 1588 standard. The
values in this field are always 0
(zero).
HWDetect Identifies a valid LXI trigger
packet
LXI
Sequence Each instrument maintains
independent sequence
counters.
• One for each combination of
UDP multicast network
interface and UDP multicast
destination port.
• One for each TCP
connection.
Domain Displays the LXI domain
number.
• The default value is zero (0).
0
1523
Flags Contain data about the LXI
trigger packet.
Values:
• 1 - Error
• 2 - Retransmission
• 4- Hardware
• 8 - Acknowledgments
• 16 - Stateless bit
Data The Series 2600A does not
support the IEEE 1588
standard. The values in this
are always 0 (zero).

Keithley 2600a series Specifications

General

Brand	Keithley
Model	2600a series
Category	Measuring Instruments
Language	English