2600AS-901-01 Rev. B / September 2008 Return to Section Topics 1-3
Series 2600A System SourceMeter® Instruments Reference Manual Section 1: Getting Started
• Web-based characterization tool that provides easy access to data gathering, sweeping,
and pulsing features.
Organization of manual sections
The manual sections in the PDF version of this manual can be viewed by clicking the “Bookmarks”
tab on the left side of this window. This tab also provides direct links to the various sections and
section topics.
The manual sections are also listed in the Table of Contents located at the beginning of this
manual.
General information
Warranty information
Warranty information is located at the front of this manual. Should your Series 2600A require
warranty service, contact the Keithley Instruments representative or authorized repair facility in
your area for further information. When returning the instrument for repair, be sure to complete and
return the service form at the back of this manual to provide the repair facility with the relevant
information.
Contact information
If you have any questions, please contact your local Keithley Instruments representative or call
one of our Application Engineers at 1-888-KEITHLEY (1-888-534-8453), U.S. and Canada only.
You can also contact us through our website at www.keithley.com.
Unpacking and inspection
Inspection for damage
The Series 2600A was carefully inspected electrically and mechanically before shipment. After
unpacking all items from the shipping carton, check for any obvious signs of physical damage that
may have occurred during transit (there may be a protective film over the display lens, which can
be removed). Report any damage to the shipping agent immediately. Save the original packing
carton for possible future shipment. Before removing the Series 2600A from the bag, observe the
following handling precautions.
Handling precautions
• Always grasp the Series 2600A by the covers or by the handle.
• After removing the Series 2600A from its anti-static bag, inspect it for any obvious signs of
physical damage. Report any such damage to the shipping agent immediately.
• When the Series 2600A is not installed and connected, keep the unit in its anti-static bag
and store it in the original packing carton.
Package content
The following items are included with every Series 2600A order:
• Model 2601A, 2602A, 2611A, 2612A, 2635A, or 2636A SourceMeter instrument with line
cord
• Two RJ-45 crossover cables
To Next Page
Loading...
Need help?
General
