Keithley 2600a series - Working with the Web Interface; Web Browser Requirements; Accessing the Web Interface

17-2 Return to Section Topics 2600AS-901-01 Rev. B / September 2008
Section 17: Web Interface and TSB Embedded Series 2600A System SourceMeter® Instruments Reference Manual
Working with the web interface
The Series 2600A has a web interface that you can use to access the following:
• Connection string
• LXI class
• Firmware version number
• MAC address
• Instrument model
• Connection string
• Virtual front panel
• TSB embedded
Web browser requirements
The web interface uses different technologies to display information. If you cannot view the virtual
front panel or other topics on the page, make sure your web browser meets the minimum
requirements.
Table 17-1 displays the web browsers and the version tested with the Series 2600A.
Table 17-1
Web Browser Requirements
Welcome page overview
You can use the welcome web page to view the following information in read-only format:
• IP configuration
• Serial number
• LXI Class
• MAC address
•Host name
• Firmware revision number
Accessing the web interface
Complete the following steps to log in to the web interface.
1. Open a web browser.
2. In the address bar, type the IP address for the instrument.
Figure 17-1 displays LXI welcome page.
Web browser Version number
Microsoft Internet Explorer 6.0 or higher
Mozilla Firefox 1.5 or higher
Java Platform Standard Edition
(Java SE)
6.0 or higher