Keithley 2600a series - Page 272

14-6 Return to Section Topics 2600AS-901-01 Rev. B / September 2008
Section 14: System Expansion (TSP-Link) Series 2600A System SourceMeter® Instruments Reference Manual
Figure 14-2
Multiple TSP-Link networks
The second method to run parallel test scripts is to use groups with a single TSP-Link network. A
group consists of one or more nodes with the same group number. Each group on the TSP-Link
network can run different test scripts at the same time (in parallel).
Figure 14-3 displays a single TSP-Link network with groups. This method requires one TSP-Link
network and a single GPIB connection to the PC.
GPIB
TSP-Link In
TSP-Link Out
SMU A
2602A
SMU B
GPIB
TSP-Link In
TSP-Link Out
SMU C
2601A
Master
Slave
3 Channel System
To PC
GPIB
TSP-Link In
TSP-Link Out
SMU A
2602A
SMU B
2 Channel System
To PC
GPIB
TSP-Link In
TSP-Link Out
SMU A
2602A
SMU B
GPIB
TSP-Link In
TSP-Link Out
SMU E
2601A
Master
Slave
16+ Channel System
To PC
GPIB
TSP-Link In
TSP-Link Out
SMU C
2602A
SMU D
Slave


