Keyestudio ESP32 - 8.2 Install Development Board and Driver

To Next Page

To Previous Page

ESP32 Starter Kit

8.1.2 2).Install Arduino IDEMac

Its download method is similar to the Windows.

8.2 2.Install Development Board and Driver

8.2.1 1).Windows System

Connect the control board to computer via USB. For Windows 10, the driver will be automatically installed. For

Windows 7 and others, you should install it manually.

USB-to-serial port chip of the board is CP2102, and we need to install it.

Download Link of CP2102 Driverhttps://fs.keyestudio.com/CP2102-WIN

Then will appear and unzip it. –

If the control board is connected to your computer for the ﬁrst time, please click Computer–Attributes–Device Manager:

8.2. 2.Install Development Board and Driver 29