Keysight E5071C ENA - Page 117

Keysight E5071C ENA Network Analyzers 117
Troubleshooting
To configure the CPU Mother Board Assembly and BIOS
Run the BIOS setup utility to load Setup Default
Procedure
Step 1. Connect the external keyboard to the E5071C rear panel USB connector.
Step 2. Turn the instrument on.
Step 3. Press [F2] key as soon as the splash screen as shown in Figure 4-5 is
displayed. Wait a few seconds until the message "Enter CURRENT
Password:" appears.
Step 4. Press key (The LED in the key lights.)
Step 5. Enter password "e507xa" and press . Then BIOS setup utility main menu
is displayed as shown in Figure 4-28.
E5070-62090 Core i7 2.53 GHz MY463/4,
SG463/4
No password Not necessary
E5070-62091 Core i7 2.53 GHz MY465/6,
SG465/6
No password Not necessary
E5071-62060 Core i5 3.00 GHz MY467,
SG467
No password Not necessary
Table 4-18 BIOS Options
Digital
Motherboard
Part Number
CPU Unit Prefix
at Factory
Shipment
BIOS
Password
BIOS Setup
After Digital
Motherboard
Replacement