Keysight E5071C ENA - Receiver if Range Adjustment; Receiver Ports Characteristics Adjustment; Receiver Absolute Gain Adjustment

62 Keysight E5071C ENA Network Analyzers
Adjustment
Required Adjustment after Replacing Assembly
3-
Receiver IF Range Adjustment
The purpose of this procedure is to adjust IF Range.
Required equipment for the receiver IF range adjustment
1) Up to 8.5 GHz Options
2) Over 8.5 GHz Options
Receiver Ports Characteristics Adjustment
The purpose of this procedure is to adjust source match, directivity and
tracking.
Required equipment for the receiver ports characteristics adjustment
1) Up to 8.5 GHz Options
2) Over 8.5 GHz Options
Receiver Absolute Gain Adjustment
This item writes the coefficient in Absolute measurement.
Required equipment for the receiver absolute gain adjustment
None
Description Recommended Model
N(m)-N(m) Cable Keysight N6314A (p/n 8120-8862)
Description Recommended Model
SMA Cable Keysight p/n 5062-6693
Description Recommended Model
Calibration Kit Keysight 85032F
N(m)-N(m) Cable Keysight N6314A (p/n 8120-8862)
Description Recommended Model
Calibration Kit Keysight 85052D
SMA Cable Keysight p/n 5062-6693