Keysight E5071C ENA - Writing ID; OCXO Adjustment

Keysight E5071C ENA Network Analyzers 59
Adjustment
Required Adjustment after Replacing Assembly
Writing ID
This item writes the serial number and the option structure into the E5071C.
Required equipment for the writing ID
None
OCXO Adjustment
The purpose of this procedure is to adjust the 10 MHz OCXO.
Table 3-2 Over 8.5 GHz Options
Replaced Assembly Adjustment Item
Writing ID OCXO Frequency Reference AUX Input Synthesizer Gain Source Output Power Receiver IF Range Receiver Port Characteristics Receiver Absolute Gain
PCI-DSP Card (PCI/DSP) √
Reference Oven Board (OCXO)
√
Analogue Base Module (BAS)
√√
Synthesizer Module (SYN)
√√ √√
Receiver Module (RCV)
√√√√
Doubler Module (DBL)
√√
Distributor Module (DIS)
√√√
Imix (IMX)
√√√
Front End Module (FEM)
√√√
Hark Disk Drive (HDD)
√