Keysight E5071C ENA - Procedure to Execute the Factory Recovery (HDD Revision: Cfxxx or Chxxx)

298 Keysight E5071C Service Manual
System Recovery
System Recovery
-
Procedure to execute the factory recovery (HDD Revision: CFxxx or
CHxxx)
Step 1. Turn ON the E5071C.
Step 2. The Windows Boot Manager is displayed. Use the downward arrow key to
select “Keysight Recovery System” and press Enter.
Figure B-1 Windows Boot Manager
Step 3. Windows XP starts up and “Keysight Recovery System” window is displayed.
Type 2 to select Recover the original factory system image and press Enter.
Figure B-2 Keysight Recovery System (1/5)
Step 4. A confirmation message appears. Click OK to continue.
The recovery function for Factory image is only loaded.
The User back up function is not available.