54 Keysight E5071C ENA Network Analyzers
Performance Test
11. CROSSTALK AND SYSTEM DYNAMIC RANGE
2-
Test equipment
Test Equipment (DSG)
1
1. The DSG (Device Substitution Group) is listed below the equipment descrip-
tion, if applicable. These devices are required to be mapped in TME to execute
a test. DSGs require either GPIB communication or are important for dynamic
measurement uncertainty calculations. N/A refers to required equipment that
is not mapped as DSGs in TME.
Model Number Over 8.5
GHz
Option
2
2. Over 8.5 GHz are Options 2D5/2K5/4D5/4K5.
Up to
8.5 GHz
Option
3
3. Up to 8.5 GHz are Options
230/235/430/435/240/245/440/445/260/265/460/465/280/285/480/485.
Type-N (m) Short (N/A) 85032-60008 X
3.5 mm (m) Short (N/A) 85052-60006 X