Keysight E5071C ENA - Procedure to Execute the Factory Recovery (HDD Revision: CN925 or Above)

Keysight E5071C Service Manual -301
System Recovery
System Recovery
Procedure to execute the factory recovery (HDD Revision: CN925 or
above)
Step 1. Turn ON the E5071C.
Step 2. The boot option is displayed. Use the downward arrow key to select the
“Keysight Recovery Solution” and press Enter
Step 3. Windows PE starts up and “Keysight Recovery Program” window is displayed.
Press 1, and then press Enter.
Figure B-7 Keysight Recovery Program(1/4)
Step 4. A warning message is displayed. Press 1, and then press Enter.
Figure B-8 Keysight Recovery Program(2/4)
The recovery function for Factory image is only loaded.
The User back up function is not available.