302 Keysight E5071C Service Manual
System Recovery
System Recovery
-
Step 5. Caution is displayed. Press 1, and then press Enter.
Figure B-9 Keysight Recovery Program(3/4)
Step 6. Recovery function is performed.
Step 7. A message box appears after the completion of recovery process. Press any
key to continue.
Figure B-10 Keysight Recovery Program(4/4)
Step 8. When the recovery is finished, E5071C restarts.
Step 9. After restart, the screen for initial registration appears. Execute initial
registration. For information on the execution procedure, refer to “Initial
Registration Procedure (HDD Revision: CN925 or above)” on page 326.
If the touch screen does not work after System Recovery, refer to
“Reconfiguring Touch Panel Settings” on page 329.
To Next Page
Loading...
