Keysight E5071C ENA - Procedure to Create the User Backup Image (HDD Revision: CN924 or Below)

306 Keysight E5071C Service Manual
System Recovery
System Recovery
-
Procedure to create the user backup image (HDD Revision: CN924 or
below)
This section describes how to create the user backup image. The C and D
drives’ contents saved in this procedure are recalled when the user recovery
function is executed.
Step 1. Close the E5071C application by pressing System > Service Menu > Exit.
Step 2. Close all other applications you currently open.
Step 3. From the Windows start menu, select All Programs > Acronis > Acronis True
Image.
Step 4. Click “No, Thanks” button.
Figure B-13 Recover User Backup
Step 5. Click Backup
e5071cse1080
e5071cse1125