296 Keysight E5071C Service Manual
System Recovery
System Recovery
-
Types of system recoveries
The following 2 types of system recoveries are available.
o Factory recovery
Returns the contents of the C drive to the factory state.
o User recovery (available only when HDD revision is CN924 or below)
Returns the contents of the C and D drives to a user-specified state. To use
this function, you must prepare for recovery in advance. For information on
the preparation, see “Procedure to execute the factory recovery (HDD
Revision: CN924 or below)” on page 303 for information on the execution,
see “Procedure to execute the factory recovery (HDD Revision: CN924 or
below)” on page 303.
To Next Page
Loading...
