Keysight E5071C ENA Network Analyzers 217
Replacement Procedure
Power Supply Assembly Replacement (Up to 8.5 GHz Options for Serial Number Prefix
MY461/MY462 or SG461/SG462)
Figure 6-12 Power Supply Assembly Removal (Up to 8.5 GHz Options for Serial Number
Prefix MY461/MY462 or SG461/SG462)
Replacement Procedure
Step 1. Replace the power supply assembly by inverse procedure of removal.
Fasten the TORX T10 screws (item 7) using a torque screwdriver.
To Next Page
Loading...
