Keysight E5071C ENA Network Analyzers 229
Replacement Procedure
PCI-E DSP Card and GPIB Cable Replacement (A51) (Serial number prefix
MY462/MY463 or SG462/SG463)
Figure 6-18 PCI-E DSP Card and GPIB Cable Removal (Serial number prefix MY462/MY463
or SG462/SG463)
Replacement Procedure
Step 1. Replace the PCI-E DSP card and GPIB cable by inverse procedure of removal.
Fasten the 5/8 inch nuts (item 8) using an open-end torque wrench.
To Next Page
Loading...
