200 Keysight E5071C ENA Network Analyzers
Replacement Procedure
Replacing an Assembly
6-
Refer to the following table for the tightening torque of screws if no torque is
specified by this chapter.
Screw Driver Recommended Torque
M2.5 T8 0.56 N-m ( 5.0 lb-in)
M3 T10 1.02 N-m ( 9.0 lb-in)
M3.5 T15 1.58 N-m (14.0 lb-in)
M4 T20 2.37N-m (21.0 lb-in)
To Next Page
Loading...
