304 Keysight E5071C Service Manual
System Recovery
System Recovery
-
Figure B-11 Activate Acronis Startup Recovery Manager
Step 7. A confirmation dialog box is displayed. Push the enter to select Yes to start
the recovery of the factory backup. The recovery takes a few minutes
depending on the amount of data.
Figure B-12 Recover Factory Backup
Step 8. When the recovery is finished, push the enter select OK. The E5071C restarts
automatically.
Step 9. After restart, the screen for initial registration appears. Execute initial
registration. For information on the execution procedure, refer to “Initial
Registration Procedure (HDD Revision: CN924 or below)” on page 331.
e5071cse1034
To Next Page
Loading...
