Keysight MP4300 Series User Manual

Parameter Typical Return
A decimal value corresponding to the binary-weighted sum of
the register's bits.
<bit value>
<chanlist> one or more channels
Enable bit 2 and 4 in the NTR register: STAT:FRAM:NTR 20
Enable bit 2 and 4 in the PTR register: STAT:FRAM:PTR 20
l
If the same bits in both NTR and PTR registers are set to 1, then any transition of that bit at the
Frame Condition register sets the corresponding bit in the Frame Event register.
l
If the same bits in both NTR and PTR registers are set to 0, then no transition of that bit at the
Frame Condition register can set the corresponding bit in the Frame Event register.
l
The value returned is the binary-weighted sum of all enabled bits in the register.
STATus:OPERation[:EVENt]? (@<chanlist>)
Queries the event register for the Operation Status group. This is a read-only register, which stores
(latches) all events that are passed by the Operation NTR and/or PTR filter. Reading the Operation
Status Event register clears it.
Parameter Typical Return
<chanlist> one or more channels <bit value>
Read the operation status event register: STAT:OPER? (@1
l
The value returned is the binary-weighted sum of all enabled bits in the register. For example, with
bit 3 (value 8) and bit 5 (value 32) set and enabled, the query returns +40.
l
*RST has no effect on this register.
STATus:OPERation:CONDition? (@<chanlist>)
Queries the condition register for the Operation Status group. This is a read-only register, which holds
the live (unlatched) Operation status. Reading the Operation Status Condition register does not clear
it.
Parameter Typical Return
<chanlist> one or more channels <bit value>
Read the operation status condition register: STAT:OPER:COND? (@1
l
The value returned is the binary-weighted sum of all enabled bits in the register. For example, with
bit 3 (value 8) and bit 5 (value 32) set and enabled, the query returns +40.
l
The condition register bits reflect the current condition. If a condition goes away, the cor-
responding bit is cleared.
l
*RST clears this register, other than those bits where the condition still exists after *RST.
5 SCPI Programming Reference
134 Keysight MP4300 Series Operating and Service Guide

Keysight MP4300 Series Specifications

General

Brand	Keysight
Model	MP4300 Series
Category	Power Supply
Language	English