Keysight MP4300 Series - Page 154

SCPI Command *RST Settings
VOLTage:SASimulator:VOC 1% of nominal rating
VOLTage:SAS:SCALe 100%
Non-Volatile Settings
The following table shows the as-shipped settings of the non-volatile parameters. These are not
affected by power cycling or *RST.
SCPI Command As-shipped Settings
CALibrate:DATE empty string
CALibrate:PASSword 0
DIGital:PIN<all>:FUNCtion DINPut
DIGital:PIN<all>:POLarity POSitive
OUTPut:INHibit:MODE OFF
OUTPut:PON:STATe RST
Front Panel as-shipped settings
Front panel lockout password Disabled
Firmware update password protected Disabled
GPIB address 5
GPIB interface Enabled
LAN interface Enabled
USB interface Enabled
Wake on I/O Enabled
Interface as-shipped settings
Get GPIB Address Automatic
Subnet mask 255.255.0.0
Default gateway 0.0.0.0
Host name K-<modelname>-<last 5 digits of serial number>
mDNS service name Keysight MP4300 Modular Power System <serial number>
LAN service - VXI-11 Enabled
LAN service - Telnet Enabled
5 SCPI Programming Reference
154 Keysight MP4300 Series Operating and Service Guide