Keysight MP4300 Series User Manual

Items MP4360A Modular Power System E4360A Modular SAS
+/- Output &
sense
connections:
Part of 4-pin connector including +s, –s
Side tabs lock the connector into place
Part of 5-pin connector including +s, –s, +D
Has no locking mechanism
Diode
terminal:
Must be enabled programmatically - coming soon Connects internal diode in series with +output
Auto-parallel: Not available - coming soon Up to 4 outputs (in 2 mainframes)
Analog
connections:
Not available Connect external current monitors and programming
sources
SCPI Compatibility
E4360A commands not listed below are accepted on the MP4360A series. Note that E4360A
commands that have an optional <channel> parameter must include this parameter to be compatible
with the MP4360A series.
E4360A Command Effect on MP4360A series E4360A Command Effect on MP4360A series
ABORt commands Not available LIST commands Not available
DISPlay commands Not available OUTPut:COUPle commands Not available
CURRent:DTABle:SAS:LIST? queries Not available POWer:LIMit? Not available
CURRent:MODE:DTABle 256|4096 Ignored. Resolution is 1024 SENse:DLOG commands Not available
CURRent::MODE:PROGramming Not available SYSTem:GROup commands Not available - coming soon
CURRent:SAS:MODE IMM|LIST Ignored. Mode is IMMediate SYSTem:MMEMory commands Not available - coming soon
CURRent:SLIMit:HIGH <NRf> Not available SYSTem:PASSword commands Not available
CURRent:TABLe:OFFSet <NRf> Not available TRIGger commands Not available
FETCh:DLOG Not available VOLTage:DTABle:SAS:LIST? queries Not available
FORMat commands Not available VOLTage:SLIMit:HIGH <NRf> Not available
INITiate commands Not available VOLTage:TABLe:OFFSet <NRf> Not available
Keysight MP4300 Series Operating and Service Guide 165
5 SCPI Programming Reference

Keysight MP4300 Series Specifications

General

Brand	Keysight
Model	MP4300 Series
Category	Power Supply
Language	English